佳明导航经纬度输入和设置说明
The default format for the coordinates is degrees minutes.minutes displayed as h ddd°mm.mmm'.
The format you are using is degrees.degrees which is displayed as h ddd.ddddd°.
To change the format, from the Main Menu > Where To > Coordinates > press the options (3 bars in the top left corner of the screen) > Format > change the Format to h ddd.ddddd° > Save > press each of the fields to change the coordinates and press Done after each change.
You will also need to the last digit in your coordinates.
The coordinates given should show just north of Whitsett, TX. on Hwy 99.
Using a latitude and longitude (coordinates) instead of an "Address" may be usful to hikers who are driving to a rural meeting place and using an in-car GPS receiver. For example, a trail may cross a rural road that has no specific city-type address. If the latitude and longitude are not provided, one may be able to determine the latitude and longitude using a resource such as Google Maps or Google Earth.STEP 1: Select "Where to?"http://www.hember.ca/latlong/images/nuvi250w_01.jpgSTEP 2: Screen content may vary depending on settings.
If "Coordinates" does not appear on screen, select the down arrow (lower right).http://www.hember.ca/latlong/images/nuvi250w_02.jpgSTEP 3: Select "Coordinates".http://www.hember.ca/latlong/images/nuvi250w_03.jpgSTEP 4: Select the format you need. In this example, decimal-degrees has been selected.http://www.hember.ca/latlong/images/nuvi250w_04.jpgNote: If you acquire the coordinates (latitude and longitude) of a destination from sources such as Google Earth, one may alter settings in Google Earth to provide coordinates in the degree, degree/minute and degree/minute/second formats.STEP 5: Enter Coordinates and select "Next".http://www.hember.ca/latlong/images/nuvi250w_05.jpg
页:
[1]