XL(4ET03)用9.510SE系统无声音 - 小苹果园

with Outsourced.9101 can you save RAM. Drop complete Folder in root. Files which exist in Folder Outsourced remove it then alone from RAM.

With a File ttgo.bak, with your latest official Device-Navcore-Numbers, in root see Home not more the wrong Version. Need you only if your Device has official NOT this Version here.

You can create alone a ttgo.bak with correct Numbers or use inbuild auto Creation.
Use version.txt in root or /Config with your needed Numbers.

Current for:

TomTom GO, GO x00, GO x10, ONE 1st Edition, ONE 2nd Edition
A:7903
B:9183

Rider
A:7901
B:9181

some ONE 30-Series, XL 30-Series, ONE XL, ONE 3rd Edition
A:8010
B:9369

XL Live 2009
A:8419
B:1257

Start
A:8544
B:1836

x20,x30,630
A:8351
B:9982

x40
A:8371
B:450680

With the Switchfiles in Root or in Folder Config can you configure alone your Device.
Use the Files in root or /Config. Only root or Folder Config, NOT both!
you can also write the switchfile Names in a File setconfig.txt
to know how see into the Example File
Settings with a own unique Value needs a : on End
model:
changedtext:
sdid:

with setconfig.txt works the single switchfiles not more except

a seperate model.txt override the model: Entry in setconfig.txt

model.txt + cycle.txt
version.txt works only separate

TTSoff       = switch TTS off, not for Devices with original TTS
FMon       = FMTransmitter on (for x10)
FMoff    = switch auto enabled FM by some Emus again off, only for Device without FM, Mp3-Player not more available
btoff       = disable BT, if you not need, save then a little more RAM
bton       = if you not have BT enable it Button for Speedcams in Menu
noautooutsource = 32MB Device do outsource as Standard, to disable that
delgns       = remove (Start,supend) old TMC-Data (gns/gnsdata)
delmap       = delete each boot currentmap.dat
cleanflash= delete all from Flash what is possible (*.mac etc.), Settings lost
runcheck  = check a few "important" Files, view config.txt for Result
changedtext: = you can change the Text on Status/Info Screen, write your own Text in the File
SDid:  = write for each SD/Memory a other Number inside and you can for each use a own different Mainsetting
usesetting= use always Settings from SD, not the in Device itself saved Settings
fixtmc       = if your Antenna cant find a Station, (mainly x10)
fixpna       = rewrite the broken Map .pna File
model: =see down

model.txt = write one from following inside

ori       = switch to your real Device
x20       = switch to x20 Emulation
x30       = switch to x30 Emulation
x40       = switch to x40 Emulation
x40light(2,3)  = similar to x40 Emu. no Voice Input and BT Stuff
x50
xls
x40 is Standard for big Screen
x40light for tiny Screen

cycle.txt = switch each reset between Setting from cycle.txt <> model.txt
It Backup also the Mainsettings between both Emus.