和 armin5 版友一样的机器，XL （4ET03）Canada 310。
未破解前信息如下：
[TomTomGo]
DeviceName=TomTom XL
DeviceVersionHW=XL
DeviceSerialNumber=GJ63********
DeviceUniqueID=***** *****
RamDiskVersion=20130404
BootLoaderVersion=55282
ApplicationVersionVersionNumber=9510
ApplicationVersion=1234792.2
试过置顶贴中的SE系统9510 ONE,XL版以及在gps underground里找到的9530，均卡死在boot logo上。
唯独gps underground的这个：
http://search.4shared.com/postDo ... 510_one_one_xl.html
可以正常进系统，但是没有声音。
在GPS underground论坛里搜索，有提到可能是LoquendoTTS文件夹没有copy的问题。
然后我把原版系统的LoquendoTTS拷入，仍然没有声音。无论是电脑语音还是真人语音，不论任何语言，均不能发声。
GPSunderground论坛的搜索结果显示有相同设备的用户提问，但是没有人给出什么有用的信息，所以想请问是否有方法在9.510SE下使XL发声？
先谢过各位。
============== 已经自己解决了这个问题，放上解决方案，希望可以帮到同样问题的朋友。
已搞定。
方法如下，给需要的朋友
在根目录里有 Config 文件夹，内有 setconfig.txt 该文件是本次改出声音的关键
一些下载回来的 navicore 里会提供这样一个说明文件
with Outsourced.9101 can you save RAM. Drop complete Folder in root. Files which exist in Folder Outsourced remove it then alone from RAM.
With a File ttgo.bak, with your latest official Device-Navcore-Numbers, in root see Home not more the wrong Version. Need you only if your Device has official NOT this Version here.
You can create alone a ttgo.bak with correct Numbers or use inbuild auto Creation.
Use version.txt in root or /Config with your needed Numbers.
Current for:
TomTom GO, GO x00, GO x10, ONE 1st Edition, ONE 2nd Edition
A:7903
B:9183
Rider
A:7901
B:9181
some ONE 30-Series, XL 30-Series, ONE XL, ONE 3rd Edition
A:8010
B:9369
XL Live 2009
A:8419
B:1257
Start
A:8544
B:1836
x20,x30,630
A:8351
B:9982
x40
A:8371
B:450680
With the Switchfiles in Root or in Folder Config can you configure alone your Device.
Use the Files in root or /Config. Only root or Folder Config, NOT both!
you can also write the switchfile Names in a File setconfig.txt
to know how see into the Example File
Settings with a own unique Value needs a : on End
model:
changedtext:
sdid:
with setconfig.txt works the single switchfiles not more except
a seperate model.txt override the model: Entry in setconfig.txt
model.txt + cycle.txt
version.txt works only separate
TTSoff = switch TTS off, not for Devices with original TTS
FMon = FMTransmitter on (for x10)
FMoff = switch auto enabled FM by some Emus again off, only for Device without FM, Mp3-Player not more available
btoff = disable BT, if you not need, save then a little more RAM
bton = if you not have BT enable it Button for Speedcams in Menu
noautooutsource = 32MB Device do outsource as Standard, to disable that
delgns = remove (Start,supend) old TMC-Data (gns/gnsdata)
delmap = delete each boot currentmap.dat
cleanflash= delete all from Flash what is possible (*.mac etc.), Settings lost
runcheck = check a few "important" Files, view config.txt for Result
changedtext: = you can change the Text on Status/Info Screen, write your own Text in the File
SDid: = write for each SD/Memory a other Number inside and you can for each use a own different Mainsetting
usesetting= use always Settings from SD, not the in Device itself saved Settings
fixtmc = if your Antenna cant find a Station, (mainly x10)
fixpna = rewrite the broken Map .pna File
model: =see down
model.txt = write one from following inside
ori = switch to your real Device
x20 = switch to x20 Emulation
x30 = switch to x30 Emulation
x40 = switch to x40 Emulation
x40light(2,3) = similar to x40 Emu. no Voice Input and BT Stuff
x50
xls
x40 is Standard for big Screen
x40light for tiny Screen
cycle.txt = switch each reset between Setting from cycle.txt <> model.txt
It Backup also the Mainsettings between both Emus.
注意看 model.txt = write one from following inside 这部分
我下回来的（不论是在本版下的还是去gps underground下的），model一般都是写成x40light。所以当时我拷入破解系统启动的时候才会发现系统界面风格和我本来的界面不一致。
如果把 model 给改成 ori ，说明用你本来的界面，此时语音可以正常工作（不论是TTS还是真人都可以工作，中文也可以）。问题解决。
找到：Config/setconfig.txt 并打开
model:x40light
修改为：
model : ori
即可。注意用英文半角。
|
